|
Bore (In.) |
2
1/2 |
|
Stroke (In.) |
3 |
|
Cylinder Type |
Large Bore Air |
|
Maximum Pressure (PSI) |
250 |
|
Body Material |
High Tensile Strength Aluminum |
|
Contains |
4
Internally Threaded Sleeve Nuts Recessed in the Head
and 4 Tapped Holes in the Cap of the Cylinder which
Permit Direct Mounting at these Locations |
|
Design |
Tie
Rod, Unique, For Easy Addition of Mounts without
Removing Bolts or Retorquing |
|
Seal |
Self-centering and Pressure Loaded for Positive
Cushioning Action, Allows Pressure to Bypass and Act
on Full Piston Area for Fast Breakaway |
|
Head/Cap |
Bottom Tapped to Provide the NFPA-MS4 Mounting Pattern |
|
Hydraulic Pressure (PSI) |
400 |
|
Meets |
JIC
and NFPA Standards |
|
Piston |
Magnetic |
|
Piston Rod |
Polished Chrome Plated Steel, Have 100000 PSI Minimum
Yield, Buna N Lip Type Provides Low Friction
Characteristics, Positive Sealing and Long Life |
|
Rod Dia. (In.) |
5/8 |
|
Rod Thread (In.) |
1/2-20 |
|
Rod Thread Length (In.) |
0.75 |
|
Tie Rods |
High Strength Steel and Torqued to Maintain
Compression on Tube End Seals |
|
For Use With |
Position Sensing Switches |
|
Finish |
Silver and Black Anodized |
