| Bore (In.) |
4 |
| Stroke (In.) |
2 |
| Cylinder Type |
Large Bore Air |
| Maximum Pressure
(PSI) |
250 |
| Body Material |
High Tensile
Strength Aluminum |
| Contains |
4 Internally
Threaded Sleeve Nuts Recessed in the Head and 4 Tapped Holes in the
Cap of the Cylinder which Permit Direct Mounting at these Locations |
| Design |
Tie Rod, Unique,
For Easy Addition of Mounts without Removing Bolts or Retorquing |
| Seal |
Self-centering and
Pressure Loaded for Positive Cushioning Action, Allows Pressure to
Bypass and Act on Full Piston Area for Fast Breakaway |
| Head/Cap |
Bottom Tapped to
Provide the NFPA-MS4 Mounting Pattern |
| Hydraulic
Pressure (PSI) |
400 |
| Meets |
JIC and NFPA
Standards |
| Piston |
Magnetic |
| Piston Rod |
Polished Chrome
Plated Steel, Have 100000 PSI Minimum Yield, Buna N Lip Type Provides
Low Friction Characteristics, Positive Sealing and Long Life |
| Rod Dia. (In.) |
1 |
| Rod Thread (In.) |
3/4-16 |
| Rod Thread
Length (In.) |
1.125 |
| Tie Rods |
High Strength Steel
and Torqued to Maintain Compression on Tube End Seals |
| For Use With |
Position Sensing
Switches |
| Finish |
Silver and Black
Anodized |
